AEG GREASE GUN ADAPTER (450g - 500g Australia & NZ Guns) AEG0450500
Couldn't load pickup availability
18V AEG ADAPTER
NO MORE MESS This OxRock designed and manufactured adapter makes greasing hassle free. It converts the AEG 18V grease gun (Australia/New Zealand Models) from use of the old 450g pull off cartridges into the new 500g screw cartridges. The metal cartridge with the long plunger will no longer be required.
HOW IT WORKS.
1) Simply remove the metal cartridge and insert the adapter with a 24mm socket.
2) Torque to 25Nm, the adapter will remain in the gun permanently.
3) Insert the KAJO screw thread cartridge and prime gun as below.
4) To prime the gun, put pressure on the bottom of the cartridge and press the bleed button simultaneously. Repeat until grease exits bleeder.
5) Happy greasing!
No further bleeding is required once the first cartridge is correctly primed
TOP TIP - When changing cartridges, press white cartridge plunger until grease is pushed out the top to eliminate air pockets.
ADAPTER ONLY - NO GUN, NO GREASE INCLUDED.
How Kajo grease works?
Follow this video guide to adapt your battery grease gun for use with the KAJO 500g screw thread grease cartridges. OxRock have adapters for Milwaukee, Macnaught, Metabo, AEG, DeWalt and Makita guns.
Step by Step
1. You will need: a battery grease gun, a compatible adapter and a 24mm socket.
2. Simply remove the metal cartridge and ensure the black seal on the inside of the gun is clean (You can use a degreaser or brake cleaner to remove any old grease residue & dirt).
3. Insert the required adapter made specifically for your gun model using a 24mm socket.
4. Torque to 25Nm, try not to over tighten, the adapter is now a permanent fixture within the gun unless you decide to remove it.
5. Take the KAJO 500g screw thread grease cartridge of your choice and before removing the cap, push the plunger at the bottom to release any trapped air.
6. Now remove the cap and push the plunger again until roughly 5-10ml of grease exits the tube.
7. Insert cartridge into the adapted gun and screw until you feel resistance (Don't over tighten).
8. Push the plunger again to allow grease to enter the grease chamber manually.
9. Continue to push the plunger while simultaneously pressing the bleeder button on your gun to release any air that's inside the chamber.
10. Repeat the last step until a steady flow of grease exits the chamber.
11. Happy greasing!