KAJO CASX 2 TOP PERFORMANCE GREASE 580g CASX200580
Couldn't load pickup availability
KAJO CASX 2 is a high quality, high temperature, multipurpose, roller bearing, long-life, superior extreme pressure, top performance and biodegradable grease. A NLGI 2 calcium sulphonate complex grease containing high quality mineral oils along with corrosion & oxidation inhibitors for extraordinary resistance.
A top performance grease specifically designed for use in harsh & extreme conditions including heat, water & extreme load. This technologically advanced grease has the potential to outperform premium grease types based on lithium, aluminium & polyurea thickeners.
- Suitable for a range of low, moderate and high temperature applications (-30°C to +140°C, dropping point >300°C).
- Superior resistance to water & oxidation, protecting against rust and corrosion.
- Excellent seal against contamination (dirt, dust etc.).
- Superior mechanical stability - strong adhesiveness, long-life for lubrication on a wide range of applications to protect against wear.
-
Biodegradable for use in applications and industries where environmental concerns are high (under-water, urban sites etc.).
- Consistency: NLGI 2 - smooth, natural coloured.
TOP TIP - When changing cartridges, press white cartridge plunger until grease is pushed out the top to eliminate air pockets.
Applications
(Including but not limited to)
- Heavy duty ball, roller & friction bearings.
- Moderate to high speed wheel & plain bearings.
- Electric motor bearings.
- Universal joints.
- Automotive chassis.
- Pins & bushings.
- Steel mills, pulp & paper mills.
- Automotive applications under severe conditions.
- Construction - excavators, tilt rotators, graders, dumpers, dozers etc.
- Mining, agriculture, marine, forestry and quarry machinery & equipment.
Click here to download spec sheet.
Click here to download SDS sheet.
How Kajo grease works?
Follow this video guide to adapt your battery grease gun for use with the KAJO 500g screw thread grease cartridges. OxRock have adapters for Milwaukee, Macnaught, Metabo, AEG, DeWalt and Makita guns.
Step by Step
1. You will need: a battery grease gun, a compatible adapter and a 24mm socket.
2. Simply remove the metal cartridge and ensure the black seal on the inside of the gun is clean (You can use a degreaser or brake cleaner to remove any old grease residue & dirt).
3. Insert the required adapter made specifically for your gun model using a 24mm socket.
4. Torque to 25Nm, try not to over tighten, the adapter is now a permanent fixture within the gun unless you decide to remove it.
5. Take the KAJO 500g screw thread grease cartridge of your choice and before removing the cap, push the plunger at the bottom to release any trapped air.
6. Now remove the cap and push the plunger again until roughly 5-10ml of grease exits the tube.
7. Insert cartridge into the adapted gun and screw until you feel resistance (Don't over tighten).
8. Push the plunger again to allow grease to enter the grease chamber manually.
9. Continue to push the plunger while simultaneously pressing the bleeder button on your gun to release any air that's inside the chamber.
10. Repeat the last step until a steady flow of grease exits the chamber.
11. Happy greasing!