KAJO LMF 2 FOOD GRADE GREASE 500g LMF2000500
Couldn't load pickup availability
KAJO Food Grade Grease - Now available in 500g Screw Thread Cartridges (10% more grease than conventional tubes! KAJO LMF 2 is a high quality, Aluminium Complex Grease for lubrication and protection of roller and friction bearings that operate under high loads and temperatures.
NSF H1 approved grease designed for food & beverage production and processing applications where contact between lubricating grease and food cannot be excluded.
- Suitable for low, moderate and high temperature applications (-20°C to +120°C, dropping point 250°C).
- Excellent resistance to water & oxidation, protecting against rust and corrosion.
- Effective seal against contamination (dirt, dust etc.).
- Strong adhesiveness, long-life for lubrication roller & friction bearings to protect against wear of machinery.
- Consistency: NLGI 2 - smooth, clear colour.
- Non-toxic, odourless, tasteless
TOP TIP - When changing cartridges, press white cartridge plunger until 5-10ml of grease exits the top of cartridge to ensure of uninterrupted greasing.
KAJO 500g cartridges contain 10% more grease, reducing the number of changes and saving time.
Applications
- Roller and friction bearings of machines operating in food & beverage production and processing plants.
- Multipurpose use on machinery elements.
Click here to download spec sheet
Click here to download SDS sheet.
Approvals
- KAJO LMF 2 has the H1-approval of the NSF (National Sanitary Foundation). NSF-registration - no.133604.
How Kajo grease works?
Follow this video guide to adapt your battery grease gun for use with the KAJO 500g screw thread grease cartridges. OxRock have adapters for Milwaukee, Macnaught, Metabo, AEG, DeWalt and Makita guns.
Step by Step
1. You will need: a battery grease gun, a compatible adapter and a 24mm socket.
2. Simply remove the metal cartridge and ensure the black seal on the inside of the gun is clean (You can use a degreaser or brake cleaner to remove any old grease residue & dirt).
3. Insert the required adapter made specifically for your gun model using a 24mm socket.
4. Torque to 25Nm, try not to over tighten, the adapter is now a permanent fixture within the gun unless you decide to remove it.
5. Take the KAJO 500g screw thread grease cartridge of your choice and before removing the cap, push the plunger at the bottom to release any trapped air.
6. Now remove the cap and push the plunger again until roughly 5-10ml of grease exits the tube.
7. Insert cartridge into the adapted gun and screw until you feel resistance (Don't over tighten).
8. Push the plunger again to allow grease to enter the grease chamber manually.
9. Continue to push the plunger while simultaneously pressing the bleeder button on your gun to release any air that's inside the chamber.
10. Repeat the last step until a steady flow of grease exits the chamber.
11. Happy greasing!