KAJO LZR 2 MULTIPURPOSE GREASE (EP2) 500g - BOX OF 20
Couldn't load pickup availability
KAJO LZR 2 is a high quality, multipurpose, long-life, extreme pressure grease. An NLGI 2 lithium soap based grease containing high quality mineral oils, extreme pressure (EP) additives along with corrosion & oxidation inhibitors for extraordinary resistance.
- Suitable for both low and moderate temperature applications (-30°C to +120°C or 140°C short term). For higher temperature uses, consider using KAJO LC 002 OR CASX 2.
- Excellent resistance to water & oxidation, protecting against rust and corrosion.
- Effective seal against contamination (dirt, dust etc.).
- High mechanical stability - strong adhesiveness, long-life for lubrication on high shock and service loads to protect against wear.
- Consistency: NLGI 2 - smooth, blue colour.
TOP TIP - When changing cartridges, press white cartridge plunger until grease is pushed out the top to eliminate air pockets.
KAJO 500g cartridges contain 10% more grease, reducing the number of changes and saving time.
APPLICATIONS
(Including but not limited to)
- Light duty ball, roller & friction bearings (see LC 002 OR CASX 2 for heavy duty bearing grease).
- Slow speed plain bearings.
- Universal joints.
- Automotive chassis.
- Pins & bushings.
- Automotive - cars, trucks, tractors, trailers etc.
- Construction - excavators, graders, dumpers, dozers etc.
- Agriculture, forestry and quarry machinery & equipment.
Is this the right grease for you? See comparison sheet here
Click here to download spec sheet
Click here to download SDS sheet.
How Kajo grease works?
Follow this video guide to adapt your battery grease gun for use with the KAJO 500g screw thread grease cartridges. OxRock have adapters for Milwaukee, Macnaught, Metabo, AEG, DeWalt and Makita guns.
Step by Step
1. You will need: a battery grease gun, a compatible adapter and a 24mm socket.
2. Simply remove the metal cartridge and ensure the black seal on the inside of the gun is clean (You can use a degreaser or brake cleaner to remove any old grease residue & dirt).
3. Insert the required adapter made specifically for your gun model using a 24mm socket.
4. Torque to 25Nm, try not to over tighten, the adapter is now a permanent fixture within the gun unless you decide to remove it.
5. Take the KAJO 500g screw thread grease cartridge of your choice and before removing the cap, push the plunger at the bottom to release any trapped air.
6. Now remove the cap and push the plunger again until roughly 5-10ml of grease exits the tube.
7. Insert cartridge into the adapted gun and screw until you feel resistance (Don't over tighten).
8. Push the plunger again to allow grease to enter the grease chamber manually.
9. Continue to push the plunger while simultaneously pressing the bleeder button on your gun to release any air that's inside the chamber.
10. Repeat the last step until a steady flow of grease exits the chamber.
11. Happy greasing!